Fuel pressure regulator for Weber, Holley and SU carburetors 0-5 PSI
Suited to low pressure carburetors: Holley, SU, Weber DCOE IDF applications where fitted with mechanical or electric fuel pumps of output up to 12PSI. No return line needed, easily installed in-line before carburettor.
Adjust pressure from 1 to 5 PSI by just turning the dial at the top. Petrol only (NO Ethanol / Alcohol blends). NOTE: While plastic is supplied in the packaging, we suggest using brass fittings - 1/8BSP thread. Hint: Use epoxy based sealant on the threads (5min epoxy), do NOT use thread tape.
Suited to low pressure carburetors: Holley, SU, Weber DCOE IDF applications where fitted with mechanical or electric fuel pumps of output up to 12PSI. No return line needed, easily installed in-line before carburettor.
Adjust pressure from 1 to 5 PSI by just turning the dial at the top. Petrol only (NO Ethanol / Alcohol blends). NOTE: While plastic is supplied in the packaging, we suggest using brass fittings - 1/8BSP thread. Hint: Use epoxy based sealant on the threads (5min epoxy), do NOT use thread tape.
Suited to low pressure carburetors: Holley, SU, Weber DCOE IDF applications where fitted with mechanical or electric fuel pumps of output up to 12PSI. No return line needed, easily installed in-line before carburettor.
Adjust pressure from 1 to 5 PSI by just turning the dial at the top. Petrol only (NO Ethanol / Alcohol blends). NOTE: While plastic is supplied in the packaging, we suggest using brass fittings - 1/8BSP thread. Hint: Use epoxy based sealant on the threads (5min epoxy), do NOT use thread tape.